Skip to product information
1 of 4

EMAX Compressor

EMAX Industrial Plus E4500 Series Emax Variable Speed 7.5/10/15/20-HP 1Ph/3Ph Rotary Screw Mounted on 120G Tank (no dryer) - ERV0071201, ERV0071203, ERV0101201, ERV0101203, ERV0151203, ERV0201203

EMAX Industrial Plus E4500 Series Emax Variable Speed 7.5/10/15/20-HP 1Ph/3Ph Rotary Screw Mounted on 120G Tank (no dryer) - ERV0071201, ERV0071203, ERV0101201, ERV0101203, ERV0151203, ERV0201203

Regular price $11,734.00 USD
Regular price Sale price $11,734.00 USD
Sale Sold out
Shipping calculated at checkout.
Horse Power
Phase

Key Differences in EMAX Rotary Screw Air Compressors

  • Expert experience in the air industry
  • Innovative product design
  • Highest quality components
  • Professional workmanship
  • Our commitment to excellence
  • Our GUARANTEE to stand behind our product!

Rotary Screw Air System snapshot:

  • Three Phase Power: 208/230/460, Three phase, variable speed
  • Drive-Tek™ Design: Reduces energy demand up to 33%
  • Standard Y-Delta Soft Start Motor: Provides reduced energy demand and amp draw on start up
  • Spin-Tek™ Design: Unique easy access oil filters & air/oil separators, Requires no tools to remove/install saving time and money
  • Precision Engineered Rotary Air End: Highly efficient design provides maximum discharge
  • Heavy Duty Sound Attenuated Cabinet: Provides lower decibel operation than a typical rotary screw
  • Designed for Use with Stationary Air Receiver

The Heart of EMAX Rotary Screw:

The Airend is the most important part of your compressor, it is the heart of the machine that actually compresses the air. That is why here at Emax Compressor we use only the best German and Finland name brand airends. Most airends are only good for up to 40,000 hours and then they need a complete overhaul, with our airends they are good for 70,000 running hours as long as the unit is maintenance routinely and the correct oil is used. EMAX Compressor Gives you a 10 year warranty on all their airends!

All Emax Air Rotary Screw air compressors are equipped with these state of the art screw airend compressors manufactured in Germany and Finland. These airends have precision-aligned back to back tapped roller bearings with close tolerances guarantee long life cycles and outstanding reliability. Each air end is tested to meet consistent high quality standards.

Premium Industrial Motors

We use only premium industrial name brand motors to run our compressors. Emax uses only low 1750 RPM motors. We have chosen motors that come with the best certificates and quality assurances so we know that you are getting the best as well! We use High Efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste-heat output and less vibration. We also pass the motor warranty on to you for a full 5 years on single phase and a full 10 years on 3 phase!!

Receiving Tank

These units come mounted on a 120-gallon Horizontal painted receiving tank equipped with auto drain, hydraulic hoses, and fittings.

These tanks are made in the USA and have ring-based design to prevent cracking, Standard NPT ports, ASME, NBBI, & CRN approvals, they are rated up to 450 degrees F, and they are coated with anti-corrosive/rust prevention blended steel to increase the tank's life.

Programmable Logic Controller

These rotary’s are controlled by a user-friendly Logika PLC (Programmable Logic Controller). This controller makes this unit bulletproof. These controllers have many features that are extremely user-friendly and easy to use. Here are some of its key features.

  • Variable speed ready to control the speed of the motor
  • Adjust Pressure – set pressure range with shutdown in case of overpressure
  • Low Oil Shutdown – shuts down if high temperature or low oil is sensed
  • Reverse Fault – senses reverse rotation fault and shuts the unit down
  • High Voltage Fault – shuts down for over/under voltage
  • Over AMP Shutdown – shuts down if the motor pulls too many amps
  • Clock and Date – Built-in Clock and Date for maintenance tracking
  • Light – Has a built-in light for dark locations
  • Parameters – Maintenance parameter system for control information
  • Hour meter – Built-in hour meter to track running hours
  • Fault History - The PLC stores history if the unit shuts down
  • Maintenance Service – Tracks air, oil, and coalescing filter changes
  • Air Differential Control - Wide range of pressure settings
  • Built-in Timer - shuts down the machine after 20 minutes under no load
  • On-line demand - continuous run mode for high air demand
  • Warranty – These PLC’s carry a 5-year warranty
  • Daily / weekly Schedule – Programmable start and shutdown times
  • Self Start – automatically restarts after power loss
  • Master Slave – switch between units while maintaining use hours

The BEST Warranty Around!

Emax Compressor backs all their compressors with the best warranty in the industry. Emax Compressor gives their Rotary screws a full 10-year warranty! The warranty is NOT pro-rated. Labor is covered for the first 12 months for major repairs. No need to buy a service plan or extended warranty, just use our oil and filters. Our trained service and support team is ready if you ever need them, and we carry a full line of new replacement parts.

Product Sheet

Emax Rotary Screw Manual

LogikaControl PLC – Logik 25-S Manual

LogikaControl PLC – Logik 26-S Manual

View full details