Skip to product information
1 of 2


EBAC DD700+ Desiccant Dehumidifier - 231 PPD, 410 CFM, -4°F

EBAC DD700+ Desiccant Dehumidifier - 231 PPD, 410 CFM, -4°F

Regular price $13,565.00 USD
Regular price $16,684.95 USD Sale price $13,565.00 USD
Sale Sold out
Shipping calculated at checkout.


Dehumidifiers are required wherever there is a need to lower the humidity level to prevent corrosion, mold growth and condensation or maintain a low humidity condition during manufacture, packaging or storing of hygroscopic products.

Methods Of Dehumidification

Dehumidification is possible using two possible principles, Condensation with refrigeration style dehumidifiers and Adsorption with desiccant dehumidifiers. Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates, a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream; this hot wet air is then exhausted outside the area being dried.

Key Design Features

  • Stainless Steel Construction
  • Auto / Manual Mode Selection
  • Electronic Controls
  • High Capacity Heater
  • Remote Humidistat Facility
  • Low Temperature Operation
  • Ammeter

Why Choose EBAC

EBAC is Europe’s leading manufacturer of dehumidifiers and is a name you can rely on. No matter how extreme the conditions EIPL’s efficiency copes comfortably even at the coldest temperatures.

Rugged Construction & Years Of Service

Over thirty seven years of development experience means you can rely on the proven track record of the EIP range of dehumidifiers. Every dehumidifier is designed for efficiency and ruggedness, and built to last. The popularity of EIP Ltd’s dehumidifiers with the plant hire trade speaks for their reliability, portability and outstanding durability.


The DD700+ is an extension to the standard DD700 range, The “+” versions offers the user a totally PLC based control system, filter cleanliness monitoring and belt tension monitoring, and also the ability to interface to the EIPL energy saving, Pre Heat and Post Cool modules. The DD Range incorporates high capacity PTC heaters, ensuring maximum drying is immediately reached and constantly maintained while the unit is running. The DD700+ incorporates two EC fans with variable speed allowing the unit to be easily installed, and commissioned in a wide variety of installations. Temperature control via the PLC, allows the user to select the desired drying level ie, high efficiency drying, deep drying, or high extraction. The EIP range of DD desiccant dehumidifiers are all manufactured from an epoxy powder coated steel (stainless steel versions also available), ensuring a rust free product when used in the most severe of applications. The spigot connectors allow quick and easy installation. All models incorporate a high efficiency patented PPS Rotor. This design incorporates an 82% active Silica Gel to ensure optimum performance over the equipment’s wide operating range of environments. All desiccant rotors supplied by EIPL are washable, and designed for high performance / long life.


Part Number 10670GR-US 10671GR-US
Height (inch) 58 58
Width (inch) 29 29
Depth (inch) 25 25
Weight (lbs) 170 170
Voltage 220 460
Phase 3 3
Frequency(Hz) 60 60
Power(kW) 7.5 7.5
Current(A) 20 10
Process Airflow(cfm) 410 410
Regen Airflow (cfm) 95 95
Process Duct Size (inch) 5.0 5.0
Regen Duct Size (inch) 4.0 4.0
Noise Level (dba) 67 67
Typical Extraction (ppd) 231 231
Min Operating Temp (°F) -4 -4
Max OperatingTemp (°F) 104 104

Product Sheet


Diagram & Schematics

Spare Parts List

In the Box


View full details